![]() Propane torch or heat gun: Used for bubble release. ![]() Gloves or notched spreader or squeegee: May be needed for certain product applications.Brush: Sometimes a small brush is needed for coating edges of crevices.Stick: Must have flat, straight edge to ensure thorough mixing.>.Mixing container: Should have smooth flat bottom and be clean and dust free.Measure two parts resin component to one part hardener component in a clean container. Caution: Inaccurate measuring will cause epoxy surface to remain soft or sticky “spots” on the epoxy surface.Unused resin and hardener should be left in their original storage containers and used within 60 days to avoid undesirable yellowing inside the bottles.Carefully scrape the sides and bottom of the pail during mixing. Thoroughly mix the epoxy with a stir stick.Do not exceed 1.5 gallons combined in a single batch. Measure two parts Resin A to one part Hardener B by volume.Mix only the amount of Ultra Clear Deep Pour Epoxy that you need at one time.It is a good idea to put a newspaper or a drop cloth under the item to catch the drips. Any item to be coated should be about two inches above the work area so that the extra mixture will drip off the item.For surfaces like paper, use Mod Podge.For wood, apply two to three coats of our bartop epoxy as a seal coat, sanding lightly between coats. For best results, the substrate surface must be dry and free of dust, wax, grease, or oil.You may also add Universal Paint colorants to achieve the desired results if they are water-based and not oil-based.Ī 1.5 gallon kit contains one gallon of resin component and a half gallon of hardener component. Use multiples coats to achieve the desired thickness.įor coloring, Pigmently Epoxy Colored Pigments or Pigmently Liquid Dye can be mixed in. Note: Pouring a single layer with a thickness greater than one inch may cause excessive bubbles, yellowing, and distortion in the surface. 1 inch thick – 1.5 gallon kit – 2.5 square feet.½ inch thick - 1.5 gallon kit - 5 square feet. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |